Streaming HD Board Upgrade: We are pleased to announce a significant upgrade to the Streaming HD board, which now features the same advanced network stack as the C10 device.
We've made improvements to stability, in some challenging conditions, and fixed various issues to provide you with a more reliable performance.
2.3
TIDAL Connect support: with TIDAL Connect, you can now effortlessly stream your favorite TIDAL music from any device (Apple included) with the TIDAL app directly to our system. Enjoy high-quality sound, without the need for the CH-Control app.
Background firmware update: adds support for background firmware updates, which are triggered by the CH-Control application. To use this feature, the device needs to have a USB key attached - use the provided one. It is highly recommended to keep the USB key permanently attached to ensure that the device can receive automatic firmware updates in the future.
Stability: enhanced system resilience to mitigate impacts following a significant EMI event.
2.2
Improve Streaming HD operation in harsh networks.
Various bugfixes.
2.1
Finalize support for Clock Sync boards.
Fix clipping when analog input is configured as phone with a high input gain (>12dB).
Fix message display during display firmware upgrade.
Match volume bar colors with volume numbers.
2.0
Complete rewrite of the DSP to introduce fixed-point spline algorithm.
MQA support over all input sources.
Myriad of various fixes and enhancements accumulated over a too big time interval between releases.
1.9
(Streaming HD) Increase audio buffer size to better cope with network variance.
Add possibility to take network commands without fully participate to CH network protocol.
Add support for VOLUME_STEP commands through network, useful for home automation.
Various network enhancements and fixes.
1.8
(Networking) Fix a potential endless boot-loop (DSP booting → Setting up network → No audio signal → DSP booting, etc.) with Streaming (all version) boards that may survive a standby/wake-up cycle.
(Streaming HD) Fix channel inversion when pausing/un-pausing tracks with a sample rate multiple of 44100Hz.
(Streaming HD) Fix a potential 5 seconds delay at the beginning of a track due to bad router configuration.
1.6/1.7
Add support for new display panels.
Temperature scale for new display starts the red zone at 70°C as before.
Network enhancements.
Change potentially upsetting terms in menus.
1.5
Roon certified.
1.4
Fix volume behaviour after input type transition Bypass → Normal and mode transition Amplifier → Integrated.
Fix clock tracking behavior.
Fix temperature reading.
(Streaming HD) Add support for FLAC files with 32bits per sample.
(Streaming HD) Fix channel inversion when playing AIFF files.
(Streaming HD) Fix startup noise when playing some MP3 files.
Fix several display glitches.
1.3
Support of the new Ethernet Streaming HD (UPnP & Roon Ready) option board.
Status display of all inputs has been standardized (input name, volume, audio stream and clocking status, ...). Metadata are no more displayed on the I1 front display. They are only available on the controller (Roon or UPnP controller).
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
